Bookmark and Share

Author Topic: Help with netgear router and port forwarding  (Read 1217 times)

0 Members and 1 Guest are viewing this topic.

Offline cvcman

  • PcWinTech Jr. Member
  • Join Date: Jul 2017
  • Posts: 3
  • Karma: 0
Help with netgear router and port forwarding
« on: July 08, 2017, 05:53:08 PM »
man im going crazy, I have a Amcrest camera, I know the ip of the camera and can view it thru TinyCamPro app on my blackberry q10 on wifi ONLY...I have gone into the router settings to port forward both port 80 and 554 using the ip of the camera ,,,its a netgear WRG614 router..but it still wont work off wifi...any help to a rookie like me is appreciated...when I go to chec the open port the ip it shows is nothing like any of the ips I have on ipcofig

PcWinTech.com Forums

Help with netgear router and port forwarding
« on: July 08, 2017, 05:53:08 PM »

Offline trpted

  • PcWinTech Guru
  • ******
  • Join Date: Sep 2011
  • Posts: 1,136
  • Karma: 37
Re: Help with netgear router and port forwarding
« Reply #1 on: July 09, 2017, 05:43:28 PM »
Let us do this step by step. Starting off with pre-checks.

* Pre-check item one  *

#1 Most ISP have a TOS ( Terms Of Service )

#2 You need to find that TOS for your ISP.

#3 If your ISP does not say anything that you can not to run any servers of any kind - green light.

#4 If your ISP does not allow you to run any servers of any kind - yellow light.

-> Be sure to know the risk of running any kind of server.

-> You have to decide is worth the risk or not, based upon...

a) ..how easy you can get another ISP to serve you - for example.

b) ..how much does it cost to upgrade the type of account that you have with your ISP. Example from regular consumer to gaming or business plan.

********************** Pre-check item two  **********************

#1 Go to http://ipv4.whatismyv6.com/

#2 On that web page is the non bogan IPv4 (Public) Address that users from Internet use to connect to you.

#3 In your router, somewhere in there you must have the same non bogan IP Address.

Example non bogan IP Address is 999.888.777.666, but in the router the WAN IP is 10.0.0.100 - this is not ok.

#4 Important note: This is not to say that the non bogan IP Address has to be Static.

Example yesterday's IP Address was 999.888.777.666 and today's IP Address is 999.888.777.555 - this is ok.

#5 If you do not see the non bogan IP Address anywhere in the your router it's screens, it first matters what the WAN IP Address in the router is:

a) From 100.64.0.0 - 100.127.255.255, then CGNAT/NAT444/LSN is present.

>>

Quote

    If you want more details about CGNAT/NAT444/LSN, you can look at

    http://en.wikipedia.org/wiki/Carrier-grade_NAT

    The possible fixes to fix your issue if CGNAT/NAT444/LSN is present.

    #1 Have them in their NAT router forward the ports to the IP of your router..

    #2 Upgrading the type of plan that you are on with your ISP so that you get a non bogan IP Address.

    For example if you are a Residential Service Plan, consider going to a Business Service Plan.

    #3 Consider switching to another ISP that can give you you a non bogan IP Address.

    #4 For the long term future, get IPv6 working.


<<<

b) From 10.0.0.0 to 10.255.255.255, from 172.16.0.0 to 172.31.255.255 OR from 192.168.0.0 to 192.168.255.255 and if NAT router is a RJ-45 WAN port router:

Step 1: Physically find your NAT Router

Step 2: Find the WAN port of it.

Info: WAN port could be called Internet or To Modem or To ONT port.

Step 3: Report back what the brand and model of the device that is connected at the other end of the wire that is connected to the WAN port of the NAT router.

c) If from 10.0.0.0 to 10.255.255.255, from 172.16.0.0 to 172.31.255.255 OR from 192.168.0.0 to 192.168.255.255 and if your NAT router is a gateway NAT router, it matters how it is connected to the Internet (RJ-45 WAN port or acting a modem combo).

d) If the WAN IP was not any of those, it would be a good idea to check to see how the non bogan IP Address is not the same (and not NAT). If you need help finding why that is, you are to asking for help doing so.

-> Since you post what brand and model of your router is, it is a RJ-45 WAN port NAT router.


************* Pre-check item three  ***************

As how to check what the IP Address is/are, Subnet Mask is/are, Default Gateway is, MAC Address(es) is/are, DNS Server(s) are of your computer, it depends on the OS and Version.

Note: This example assumes that you are on Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8 or Windows 10

#1 Press the Windows Start key to open the Start screen.

#2 Type cmd and press Enter to launch the command prompt.

Note: You do not need to click on anything on the Start screen—typing will automatically initiate a program search.

#3 Type ipconfig /all at the command prompt to check the network card settings.

#4 If not on Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8 or Windows 10 and you do not know how to check that network info - then post what is your OS and Version is.

#5 You need to make sure that the Default Gateway on your computer is the same LAN IP as your NAT router.

*** Done with Pre-checks, doing to the next the step. ****

#1 When you forwarded you forwarded to the LAN IP of your computer?

For example assuming that the Default Gateway on your computer is the same as the NAT router's LAN IP Address and if you get this output

IP Address 192.168.1.10
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
At least one DNS 192.168.1.1

-> you would forward to 192.168.1.10
Private messages (PM) are not for support questions or for hints to not yet answered topics. The PMs are basically for confident conversation between the users, off the forum.

Offline cvcman

  • PcWinTech Jr. Member
  • Join Date: Jul 2017
  • Posts: 3
  • Karma: 0
Re: Help with netgear router and port forwarding
« Reply #2 on: July 09, 2017, 07:08:23 PM »
I am away for a few days but when I get back ill go thru all the checks...any idea why my wife's iphone using the Amcrest app can view the camera anywhere anytime??
 Would that answer any of the first few questions..sorry I'm so ignorant about this stuff bbut thx so much!!!!

Offline trpted

  • PcWinTech Guru
  • ******
  • Join Date: Sep 2011
  • Posts: 1,136
  • Karma: 37
Re: Help with netgear router and port forwarding
« Reply #3 on: July 10, 2017, 10:56:31 AM »
Please note this is an educated guess - I could be wrong.

Your NAT router has a loopback / Reverse Nat Issue.

http://www.pcwintech.com/test-for-reverse-nat
Private messages (PM) are not for support questions or for hints to not yet answered topics. The PMs are basically for confident conversation between the users, off the forum.

Offline cvcman

  • PcWinTech Jr. Member
  • Join Date: Jul 2017
  • Posts: 3
  • Karma: 0
Re: Help with netgear router and port forwarding
« Reply #4 on: July 10, 2017, 02:56:56 PM »
I sure wish I knew what all this means...and why the iphone works on the Amcrest app but my BlackBerry doesnt,,,,im lost

PcWinTech.com Forums

Re: Help with netgear router and port forwarding
« Reply #4 on: July 10, 2017, 02:56:56 PM »

 

email