Bookmark and Share

Author Topic: Jetpack™ MiFi® 6620L Port Forwarding Issues  (Read 606 times)

0 Members and 1 Guest are viewing this topic.

Offline TheDodoLord

  • PcWinTech Jr. Member
  • Join Date: Jun 2017
  • Posts: 2
  • Karma: 0
Jetpack™ MiFi® 6620L Port Forwarding Issues
« on: June 07, 2017, 07:01:46 PM »
Hello, as the title states i am having substantial issues with Port Forwarding on my Jetpack™ MiFi® 6620L i would assume it is possible as the devices admin page (as with all modems/routers was navigated to by its IP address) depicts it is a possibility however the system contained is a rather weird way to port forward, its setup is this (Custom Program) (IP) (Port Start) (Port End) (TCP/UDP) and i have no idea what to do. side note i have never port forwarded before and no tutorials i can find fit the parameters my hotspots Port Rules are restricted too and Verizon has a very very under detailed explanation which doesn't even show you how to set up your own port rules.

Also, i am trying to set up a minecraft server VIA Port Forwarding on port (25565)

Please Help!

PcWinTech.com Forums

Jetpack™ MiFi® 6620L Port Forwarding Issues
« on: June 07, 2017, 07:01:46 PM »

Offline trpted

  • PcWinTech Guru
  • ******
  • Join Date: Sep 2011
  • Posts: 1,088
  • Karma: 37
Re: Jetpack™ MiFi® 6620L Port Forwarding Issues
« Reply #1 on: June 08, 2017, 01:12:06 PM »
Let us do this step by step. Starting off with pre-checks.

* Pre-check item one  *

#1 Most ISP have a TOS ( Terms Of Service )

#2 You need to find that TOS for your ISP.

#3 If your ISP does not say anything that you can not to run any servers of any kind - green light.

#4 If your ISP does not allow you to run any servers of any kind - yellow light.

-> Be sure to know the risk of running any kind of server.

-> You have to decide is worth the risk or not, based upon...

a) ..how easy you can get another ISP to serve you - for example.

b) ..how much does it cost to upgrade the type of account that you have with your ISP. Example from regular consumer to gaming or business plan.

********************** Pre-check item two  **********************

#1 Go to http://ipv4.whatismyv6.com/

#2 On that web page is the non bogan IPv4 (Public) Address that users from Internet use to connect to you.

#3 In your router, somewhere in there you must have the same non bogan IP Address.

Example non bogan IP Address is 999.888.777.666, but in the router the WAN IP is 10.0.0.100 - this is not ok.

#4 Important note: This is not to say that the non bogan IP Address has to be Static.

Example yesterday's IP Address was 999.888.777.666 and today's IP Address is 999.888.777.555 - this is ok.

#5 If you do not see the non bogan IP Address anywhere in the your router it's screens, it first matters what the WAN IP Address in the router is:

a) From 100.64.0.0 - 100.127.255.255, then CGNAT/NAT444/LSN is present.

>>

Quote
If you want more details about CGNAT/NAT444/LSN, you can look at

http://en.wikipedia.org/wiki/Carrier-grade_NAT

The possible fixes to fix your issue if CGNAT/NAT444/LSN is present.

#1 Have them in their NAT router forward the ports to the IP of your router..

#2 Upgrading the type of plan that you are on with your ISP so that you get a non bogan IP Address.

For example if you are a Residential Service Plan, consider going to a Business Service Plan.

#3 Consider switching to another ISP that can give you you a non bogan IP Address.

#4 For the long term future, get IPv6 working.

<<<

b) From 10.0.0.0 to 10.255.255.255, from 172.16.0.0 to 172.31.255.255 OR from 192.168.0.0 to 192.168.255.255 and if NAT router is a RJ-45 WAN port router:

Step 1: Physically find your NAT Router

Step 2: Find the WAN port of it.

Info: WAN port could be called Internet or To Modem or To ONT port.

Step 3: Report back what the brand and model of the device that is connected at the other end of the wire that is connected to the WAN port of the NAT router.

c) If from 10.0.0.0 to 10.255.255.255, from 172.16.0.0 to 172.31.255.255 OR from 192.168.0.0 to 192.168.255.255 and if your NAT router is a gateway NAT router, it matters how it is connected to the Internet (RJ-45 WAN port or acting a modem combo).

d) If the WAN IP was not any of those, it would be a good idea to check to see how the non bogan IP Address is not the same (and not NAT). If you need help finding why that is, you are to asking for help doing so.

-> Since you post what brand and model of your router is, it is a modem combo.


************* Pre-check item three  ***************

As how to check what the IP Address is/are, Subnet Mask is/are, Default Gateway is, MAC Address(es) is/are, DNS Server(s) are of your computer, it depends on the OS and Version.

Note: This example assumes that you are on Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8 or Windows 10

#1 Press the Windows Start key to open the Start screen.

#2 Type cmd and press Enter to launch the command prompt.

Note: You do not need to click on anything on the Start screen—typing will automatically initiate a program search.

#3 Type ipconfig /all at the command prompt to check the network card settings.

#4 If not on Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8 or Windows 10 and you do not know how to check that network info - then post what is your OS and Version is.

#5 You need to make sure that the Default Gateway on your computer is the same LAN IP as your NAT router.

*** Done with Pre-checks, doing to the next the step. ****

#1 When you forwarded you forwarded to the LAN IP of your computer?

For example assuming that the Default Gateway on your computer is the same as the NAT router's LAN IP Address and if you get this output

IP Address 192.168.1.10
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
At least one DNS 192.168.1.1

-> you would forward to 192.168.1.10

#2 For name, you may enter in anything that you want to as long as:

a) It fits

b) and you know what it means.

#3 For Starting and Ending port, in your case you need to enter in 25565 into both fields.

#4 For Protocol, you need to select the protocol that it uses.

a) If both then if possible select both.

b) If both and you can not select both, then you need one rule for TCP and the other for UDP.

c) For what you are forwarding I would believe it uses only TCP.
« Last Edit: June 08, 2017, 01:17:23 PM by trpted »
Private messages (PM) are not for support questions or for hints to not yet answered topics. The PMs are basically for confident conversation between the users, off the forum.

Offline TheDodoLord

  • PcWinTech Jr. Member
  • Join Date: Jun 2017
  • Posts: 2
  • Karma: 0
Re: Jetpack™ MiFi® 6620L Port Forwarding Issues
« Reply #2 on: June 08, 2017, 02:43:48 PM »
Yes The TOS of Verizon allowes servers as a majority of port forwarding tutorials are for Fios and i couldnt find anything in the TOS that says otherwise however, your response while i didnt understand some of it
was not what im looking for i am asking how i can use the strange settings on my router, i did upload a photo showing the layout of the Port Forwarding Rule Layout. I am on Windows 10 and have used ipconfig /all before but as far as i could guess the layout which is (Rule Name) (IPv4) (PORT START (25565)) (PORT END(25565)) (TCP/UDP) i of course put in all of the info to my best of knowledge it should be right
and my Public address (IPv6) does not work for the IP i am so confused still also i cannot make a rule for both it wont allow me to, it says i cannot use the same port for two rules. but minecraft should run on Just TCP
« Last Edit: June 08, 2017, 04:11:03 PM by TheDodoLord »

Offline trpted

  • PcWinTech Guru
  • ******
  • Join Date: Sep 2011
  • Posts: 1,088
  • Karma: 37
Re: Jetpack™ MiFi® 6620L Port Forwarding Issues
« Reply #3 on: June 08, 2017, 06:26:18 PM »
I used Google to lookup server TOS site:verizonwireless.com and of the results that came back was this

URL = https://www.verizonwireless.com/support/vz-email-legal/

Title = Terms & Conditions - Data Plans & Features.

Then under where it says Data Services: Prohibited Uses, is where it says servers are not allowed.


***
Now for DSL or FIOS, it is this

http://www.verizon.com/about/sites/default/files/Internet-ToS-04142017-v17-2-ENGLISH.pdf

Then where it say Restrictions on Use,  is where it says servers are not allowed.

**

You are saying that you only have public IPv6? Odd, because this site does not speak IPv6.
Private messages (PM) are not for support questions or for hints to not yet answered topics. The PMs are basically for confident conversation between the users, off the forum.

PcWinTech.com Forums

Re: Jetpack™ MiFi® 6620L Port Forwarding Issues
« Reply #3 on: June 08, 2017, 06:26:18 PM »

 

email