No site configured at this address

[checopoco]

Good evening,I need some help using this program,when I try to use whit my modem this show up:

Router: Onda - PN51T (TIM Italian Firmware)
Loading Commands...
No site configured at this address
Number Of Port Forwards To Send To Router (1)
Running Commands...

(Current -  1/1)
Adding torch (TCP/UDP) For Ports 1-65535 To 192.168.3.1()

Running Script From Database For Selected Router
-----------------------------------------------------------------------
Step 01. nav_first_only("")
(Successful) (http://192.168.3.1/)
--------------------------------------
Step 02. set_password("psw")
(Successful)
--------------------------------------
Step 03. click_button_first_only("login_Button")
(Successful)
--------------------------------------
Step 04. nav_first_only("firewall/port_forward.asp")
(Successful) (http://192.168.3.1/firewall/port_forward.asp)
--------------------------------------
Step 05. timeout("2000")
(Successful)
--------------------------------------
Step 06. check_if_name_exists("")
--------------------------------------
Step 07. set_ip("ip_address,0")
(Failed - Object Not Found)
--------------------------------------
Step 08. set_start_port("fromPort,0")
(Failed - Object Not Found)
--------------------------------------
Step 09. set_stop_port("toPort,0")
(Failed - Object Not Found)
--------------------------------------
Step 10. set_type_choices("TCP|UDP|TCP&UDP")
--------------------------------------
Step 11. set_combobox("protocol,0")
(Failed - Object Not Found)
--------------------------------------
Step 12. set_name("comment,0")
(Failed - Object Not Found)
--------------------------------------
Step 13. click_button("forwardVirtualSrvApply")
(Failed - Object Not Found)
--------------------------------------
-----------------------------------------------------------------------

Finished Adding torch


-------------------DONE! (All Commands Finished)-------------------

Hope somene can help me.

Thanks!

[trpted]

While I do not what Shane will reply with, I will give to you my two cents.

If the LAN IP of the router is 192.168.3.1, why are trying to forward to 192.168.3.1?

It would help that you forward to the LAN IP of your computer.

[Shane]

Post a screen shot of the program when it tries to update the router so i can see exactly what is happening.

Also why are you trying to forward all 65535 ports? If you wanted every port open you can just use DMZ in the router for that.

Adding torch (TCP/UDP) For Ports 1-65535

Shane