Author Topic: you have received a not found error from the webpage  (Read 8137 times)

0 Members and 1 Guest are viewing this topic.

Offline Vapor707

  • PcWinTech Jr. Member
  • Join Date: Nov 2014
  • Posts: 1
  • Karma: 0
you have received a not found error from the webpage
« on: November 23, 2014, 07:04:37 PM »
I am trying to open some ports so I can set up a DDNS. I am toying around with an in house DIY security system. I try to forward the ports manually but when I test to see if the ports are open it fails every time. I'm trying to use your program to open the ports, but I am running into some issues. I get the error and then the script continues to run. I will post what the script says. After the error the script says successful but the changes are not made in the router and when I test the ports they fail. Any thoughts?

Router: Belkin - F9K1105 v3 (Belkin Firmware)
Loading Commands...
Number Of Port Forwards To Send To Router (2)
Running Commands...

(Current -  1/2)
Adding my pc (TCP/UDP) For Ports 8888-8888 To 192.168.2.4()

Running Script From Database For Selected Router
-----------------------------------------------------------------------
Step 01. nav_first_only("")
(Successful) (http://192.168.2.1/)
--------------------------------------
Step 02. set_frame_name("mainFrame")
--------------------------------------
Step 03. set_frame_number("0")
--------------------------------------
Step 04. nav_first_only("nat_v.stm")
(Successful) (http://192.168.2.1/nat_v.stm)
--------------------------------------
Step 05. set_password("pws_temp")
(Failed - Object Not Found)
--------------------------------------
Step 06. click_button_first_only("Submit")
(Failed - Object Not Found)

!ERROR! (Navigating to http://192.168.2.1/Submit)
This Entry Will be Skipped.
Please Check your Router Info And Try Again.
-----------------------------------------------------------------------

--------------------------------------
Step 07. check_if_name_exists("")
--------------------------------------
Step 08. set_name_array("0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19")
(Successful)
--------------------------------------
Step 09. set_name_to_check("service_name,0")
(Successful) (Current Name From Name Array service_name0)
--------------------------------------
Step 10. set_checkbox("enable,0")
(Failed - Object Not Found)
--------------------------------------
Step 11. set_name("service_name,0")
(Failed - Object Not Found)
--------------------------------------
Step 12. set_start_port("wan_port,0")
(Failed - Object Not Found)
--------------------------------------
Step 13. set_type_choices("TCP|UDP|TCP&UDP")
--------------------------------------
Step 14. set_combobox("protocol,0")
(Failed - Object Not Found)
--------------------------------------
Step 15. set_ip4("lan_ip,0")
(Failed - Object Not Found)
--------------------------------------
Step 16. set_start_port("lan_port,0")
(Failed - Object Not Found)
--------------------------------------
Step 17. click_button_last_only("Apply")
--------------------------------------
-----------------------------------------------------------------------

Finished Adding my pc

(Current -  2/2)
Adding TEST (TCP/UDP) For Ports 8080-8080 To 192.168.2.4()

Running Script From Database For Selected Router
-----------------------------------------------------------------------
Step 01. nav_first_only("")
--------------------------------------
Step 02. set_frame_name("mainFrame")
--------------------------------------
Step 03. set_frame_number("0")
--------------------------------------
Step 04. nav_first_only("nat_v.stm")
--------------------------------------
Step 05. set_password("pws_temp")
--------------------------------------
Step 06. click_button_first_only("Submit")
--------------------------------------
Step 07. check_if_name_exists("")

This Entry (TEST) Already Exists On The Router, This Entry Will be Skipped.
-----------------------------------------------------------------------

Finished Adding TEST


-------------------DONE! (All Commands Finished)-------------------

PcWinTech.com Forums

you have received a not found error from the webpage
« on: November 23, 2014, 07:04:37 PM »

Offline Shane

  • Top Geek, err uh Dog.
  • PcWinTech Administrator
  • PcWinTech Guru
  • *******
  • Join Date: Jul 2008
  • Posts: 16,846
  • Location: USA
  • Karma: 523
  • "Knowledge should be shared not hidden."
Re: you have received a not found error from the webpage
« Reply #1 on: November 23, 2014, 11:05:05 PM »
First, change the name of the port forwarding rule to something more than just Test, change it to Test1 or something. The program looks for that word on the port forwarding page and will skip it if it finds it.

Also post a screen shot of the program when it tries to update the router so I can see hot far it gets. :wink:

Shane
(My weekends belong to my wife and kids, I will try my best to answer all posts daily during the work week)

(About Shane)
Site Owner, Top Admin, Lead Programmer, Wife & 5 kids, Needs a lot more coffee.

When people ask "Why fix what isn't broken?" I reply "To make it better."
"Only a life lived for others is a life worthwhile"
Honor & Respect is all that matters.

Owner & Programmer of: www.pcwintech.com & www.tweaking.com

PcWinTech.com Forums

Re: you have received a not found error from the webpage
« Reply #1 on: November 23, 2014, 11:05:05 PM »