Author Topic: Actiontec GT704 WG will not save UDP as forwarded protocol  (Read 6910 times)

0 Members and 1 Guest are viewing this topic.

roboates

  • Guest
Trying to forward only port 9987 UDP for initial TeamSpeak3 server install.  There are no other ports forwarded in my router. I enter the port range, UDP and the server ip (192.168.0.2) and then "Save and Restart" the router. When I log in and navigate to the Port Forwarding page to confirm, I find that the port and server ip are okay, but the protocol is changed to TCP. Power cycled, repeated tries, same result. Firewall is Off.

Version is QW04-3.60.2.0.6.3-GT704-WG

Thanks for any suggestions!
~Rob

PcWinTech.com Forums


Offline Shane

  • Top Geek, err uh Dog.
  • PcWinTech Administrator
  • PcWinTech Guru
  • *******
  • Join Date: Jul 2008
  • Posts: 16,846
  • Location: USA
  • Karma: 523
  • "Knowledge should be shared not hidden."
Re: Actiontec GT704 WG will not save UDP as forwarded protocol
« Reply #1 on: May 21, 2010, 10:27:14 PM »
Try this,
Remove the rile, save and restart.
then add 2 rules. one for TCP and the other UDP. See if it will hold the UDP then if the TCP is already in place :-)

Shane
(My weekends belong to my wife and kids, I will try my best to answer all posts daily during the work week)

(About Shane)
Site Owner, Top Admin, Lead Programmer, Wife & 5 kids, Needs a lot more coffee.

When people ask "Why fix what isn't broken?" I reply "To make it better."
"Only a life lived for others is a life worthwhile"
Honor & Respect is all that matters.

Owner & Programmer of: www.pcwintech.com & www.tweaking.com

roboates

  • Guest
Re: Actiontec GT704 WG will not save UDP as forwarded protocol
« Reply #2 on: May 22, 2010, 08:58:35 AM »
That idea got the same result. I tried just removing the rule and restarting. It took two tries before the rule was actually gone! Then I added the UDP forwarding rule as the only rule, restarted and it stuck! Now on to remote client testing through the router. I'll check back if there are any more unusual twists to this adventure. Thank you for your help!

Offline Shane

  • Top Geek, err uh Dog.
  • PcWinTech Administrator
  • PcWinTech Guru
  • *******
  • Join Date: Jul 2008
  • Posts: 16,846
  • Location: USA
  • Karma: 523
  • "Knowledge should be shared not hidden."
Re: Actiontec GT704 WG will not save UDP as forwarded protocol
« Reply #3 on: May 22, 2010, 09:18:20 AM »
ok  :wink:

I will leave this thread open for a day or so so you can test and confirm your fixed.

Let me know and I will lock the thread.  :smiley:

Shane
(My weekends belong to my wife and kids, I will try my best to answer all posts daily during the work week)

(About Shane)
Site Owner, Top Admin, Lead Programmer, Wife & 5 kids, Needs a lot more coffee.

When people ask "Why fix what isn't broken?" I reply "To make it better."
"Only a life lived for others is a life worthwhile"
Honor & Respect is all that matters.

Owner & Programmer of: www.pcwintech.com & www.tweaking.com

PcWinTech.com Forums

Re: Actiontec GT704 WG will not save UDP as forwarded protocol
« Reply #3 on: May 22, 2010, 09:18:20 AM »