nat_v.stm not found on server...frustrated

[brettnolan]

Thanks in advance.

Getting the following error in the right pane...

404 Not Found
The requested URL /nat_v.stm was not found on this server.


This info in the left pane...


Router: Belkin - F5D7234-4 v3 (Belkin Firmware)
Loading Commands...
Number Of Port Forwards To Send To Router (1)
Running Commands...

(Current -  1/1)
Adding utorrent (TCP/UDP) For Ports 17025-17025 To 192.168.2.173()

Running Script From Database For Selected Router
-----------------------------------------------------------------------
Step 01. nav_first_only("")
(Successful) (http://192.168.2.1/)
Step 02. nav_first_only("nat_v.stm")
(Successful) (http://192.168.2.1/nat_v.stm)
Step 03. set_password("pws")
(Successful)
Step 04. click_button_first_only("Submit")
(Successful)
Step 05. check_if_name_exists("")
Step 06. set_name_array("0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19")
(Successful)
Step 07. set_name_to_check("service_name,0")
(Successful) (Current Name From Name Array service_name0)
Step 08. set_checkbox("enable,0")
(Failed - Object Not Found)
Step 09. set_name("service_name,0")
(Failed - Object Not Found)
Step 10. set_start_port("wan_port,0")
(Failed - Object Not Found)
Step 11. set_type_choices("TCP|UDP|TCP&UDP")
Step 12. set_combobox("protocol,0")
(Failed - Object Not Found)
Step 13. set_ip4("lan_ip,0")
(Failed - Object Not Found)
Step 14. set_start_port("lan_port,0")
(Failed - Object Not Found)
Step 15. click_button_last_only("Apply Changes")
(Failed - Object Not Found)

[Shane]

on your main router page does it look like this? http://www.pcwintech.com/showimage?file=files/screenshots/Belkin-F5D7234-4_v3/000.png

Also try one of the other F5D7234-4 in the program, it wont hurt, one of them may work. There is also a Belkin - F5D7234-4 v3 (Belkin v3.00.03 Firmware) in the program you should try as well.

Let me know how it goes 

Shane

[brettnolan]

Yes, I went ahead and tried the other version and it was successful all the way through(pasted below).  However, I still got this error at the end...

Last Error Status Code: NOT_FOUND(404) (http://192.168.2.1/nat_v.stm)

...and I get this error... "17025 is offline and can not be reached"... when I test the port.


Router: Belkin - F5D7234-4 v3 (Belkin v3.00.03 Firmware)
Loading Commands...
Number Of Port Forwards To Send To Router (1)
Running Commands...

(Current -  1/1)
Adding utorrent (TCP/UDP) For Ports 17025-17025 To 192.168.2.173()

Running Script From Database For Selected Router
-----------------------------------------------------------------------
Step 01. nav_first_only("")
(Successful) (http://192.168.2.1/)
Step 02. nav_first_only("nat_v.zip")
(Successful) (http://192.168.2.1/nat_v.zip)
Step 03. set_password("pws")
(Successful)
Step 04. click_button_first_only("Submit")
(Successful)
Step 05. check_if_name_exists("")
Step 06. set_name_array("0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19")
(Successful)
Step 07. set_name_to_check("service_name,0")
(Successful) (Current Name From Name Array service_name0)
Step 08. set_checkbox("enable,0")
(Successful)
Step 09. set_name("service_name,0")
(Successful)
Step 10. set_start_port("wan_port,0")
(Successful)
Step 11. set_type_choices("TCP|UDP|TCP&UDP")
Step 12. set_combobox("protocol,0")
(Successful)
Step 13. set_ip4("lan_ip,0")
(Successful)
Step 14. set_start_port("lan_port,0")
(Successful)
Step 15. click_button_last_only("Apply Changes")
(Successful)
-----------------------------------------------------------------------

Finished Adding utorrent


-------------------DONE! (All Commands Finished)-------------------

[Shane]

  ok good, make sure the rule is in the router, check the page and make sure its good.
Then also reboot your router, pull the power and plug it back in, sometimes the router simply needs to be reset.

Then if the port test still fails (make sure you are using the port tester in my simple port forwarding program) then make sure to give this a good read 
http://www.pcwintech.com/common-problems-fixes-port-forwarding

Shane

[brettnolan]

Sounds good, but before I turn everything off...what is "the rule in the router?"  Is that the virtual server entry on the Belkin page?

thanks

[Evan]

You got it!  It's the port forwarding rules.  You should see the same page you saw the program working with just a little bit ago.

-Evan

[brettnolan]

Still saying the port is offline.  I have read that page thoroughly...only one router, not sure how it could be the wrong IP (static created by SPF), I had the router firewall disabled before (enabled now) and those are the only two options I found, I had SPF add the port to the windows firewall, haven't yet repaired windows firewall, just now rebooted the router (not the computer or modem), use avast and pretty sure I have no viruses or malware (I scan fairly regularly).

What next?

[Shane]

Well at this point I would like to take a look and see my self, I am always on the look out for new problems and fixes I can add to the help file 

You have good timing, I'm working on a new update to my simple internet meter right now so Im online, email me and we will get on msn or yahoo.

Shane

[Shane]

OK got logged on, and everything worked fine 

He had done a router reset to defaults before hand, I have a feeling that took care of the problem. Simple port forwarding added the port and it passed in the port tester. All good to go!  8)

Thread locked.

Shane