Problem Port Forward UT300R2U

[soumitra]

Error : Using simple port Forward v2.4.0
------------------------------------------------------
Step 01. nav("scvrtsrv.cmd?action=view")
(Successful) (http://admin:admin@192.168.1.1/scvrtsrv.cmd?action=view)
Step 02. check_if_name_exists("")
Step 03. click_button("Add")
(Failed - Object Not Found)
Step 04. set_2ndradiobutton("radiosrv,0")
(Failed - Object Not Found)
Step 05. set_name("cusSrvName,0")
(Failed - Object Not Found)
Step 06. set_ip("sIp,0")
(Failed - Object Not Found)
Step 07. set_start_port("eStart,0")
(Failed - Object Not Found)
Step 08. set_stop_port("eEnd,0")
(Failed - Object Not Found)
Step 09. set_type_choices("TCP|UDP|TCP/UDP")
(Successful)
Step 10. set_combobox("proto,0")
(Failed - Object Not Found)
Step 11. set_start_port("iStart,0")
(Failed - Object Not Found)
Step 12. set_stop_port("iEnd,0")
(Failed - Object Not Found)
Step 13. click_button("Save/Apply")
(Failed - Object Not Found)
-----------------------------------------------------------------------

Finished Adding allports

-------------------DONE! (All Commands Finished)-------------------

View/Remove Current Ports
This page is not supported.

WinXP SP3
Dynamic IP
Im trying to this for past 1 month...
Tried using simple port Forward v2.4.0 with static IP...Didn't work too.
I had once got my ports opened...Now they never forward again...


Error: I could not see your service on xxx.xxx.xxx.xxx on port (80)
Reason: Connection timed out

No port can be seen 1~65535...Seems very weird doesn't it?
With STL Port Forward i can forward my ports only with the application running. I mean i have to always run it.
Im sick of forwarding now.. Help would be really appreciated.

[Shane]

all the steps failed after step 1. also spf is up to 2.4.5 so make sure to update as I fix a lot of things.

If it still fails with 2.4.5 I will double check the script and try to fig out whats going on. You can also try debug mode under the advanced menu. This will let you control when it goes to the next step. This will help see if it is a timing issue.

Shane