Author Topic: "You cannot access this page" when trying to port forward. (Read 1037 times)

Farzeer · « **on:** December 12, 2011, 02:47:46 PM »

I have Telewell - TW-EA510 v3 B (telewell Finnish Firmware) router. I tried to forward port "43594" and it gave me error "Access Error: Data Follows" in step 5 i think.

Internet Explorer's security is on default and login information is correct since it can login.

Picture of the error is in attachments.

Shane · « **Reply #1 on:** December 12, 2011, 07:31:41 PM »

Its possible your ISP has blocked the port forwarding page. Are you able to get to the port forwarding page your self through the menu in the router?

Shane

Farzeer · « **Reply #2 on:** December 12, 2011, 09:41:14 PM »

I'm able to get to port forwarding page manually.

Shane · « **Reply #3 on:** December 13, 2011, 10:30:35 AM »

Can you post a screen shot of it for me? I will compare it with the screens I have. Perhaps you have a different firmware than what I made the script for

Shane

Farzeer · « **Reply #4 on:** December 13, 2011, 11:45:35 AM »

Here's the picture.

Shane · « **Reply #5 on:** December 13, 2011, 01:35:08 PM »

Same one I have. If you right click on the menu for the page and click copy link can you past that for me?

The screens I have give me
http://192.168.0.254/vserver.asp?_bn_hdl=1505021133

With the number at the end being random.

Let me know what you get

Shane

Farzeer · « **Reply #6 on:** December 14, 2011, 04:54:53 AM »

I get this link:

http://192.168.0.254/vserver.asp

There's no numbers or anything after the "vserver.asp".

Shane · « **Reply #7 on:** December 14, 2011, 11:40:06 AM »

Must be a different firmware version

The one I have was from 2010. I only read English, but if I am looking at the right screen shot the one I have is firmware version 1.07-4

Perhaps I just need to update the current script to the new link

What version do you have?

Shane

Farzeer · « **Reply #8 on:** December 14, 2011, 12:37:06 PM »

I'm not 100% sure i checked it from the right place but this is what i found;

DSP Firmware Version DMT FwVer: 3.9.4.14_A, HwVer:TeF7_5.0

Shane · « **Reply #9 on:** December 14, 2011, 12:40:50 PM »

I am going to just update the script with the new link and see how it goes. Should have it up in the next 30 min

All you will need to do is update the database in the program to get and then let me know how it goes.

Shane

Farzeer · « **Reply #10 on:** December 14, 2011, 12:44:26 PM »

Alright. Thanks

Shane · « **Reply #11 on:** December 14, 2011, 12:46:47 PM »

Updated

Shane

Farzeer · « **Reply #12 on:** December 14, 2011, 12:59:20 PM »

I still get the same problem but if i go to "port mapping" manually in debug mode, it will get the rest of the steps successfully done though.

Shane · « **Reply #13 on:** December 14, 2011, 01:03:21 PM »

Did you update the database?

Post a screen shot with the log, this way I can see if you got the new script

Shane

Farzeer · « **Reply #14 on:** December 14, 2011, 01:07:08 PM »

Here's the picture.

Subject / Started by	Replies	Last post
Cant get into my router page "Forbidden" Started by tirre Port Forwarding	3 Replies 1468 Views	March 02, 2010, 03:55:00 PM by Shane
Router Screen Capture "Make sure to view every page" Started by Michael Ura (Program) Router Screen Capture	9 Replies 4339 Views	June 01, 2010, 09:39:26 PM by Shane
Succes on testing port from "BEGIN" failure when press "check" in pc wintech win Started by wierdtaz (Program) Simple Port Forwarding	9 Replies 2074 Views	August 31, 2010, 08:35:26 AM by Shane
Quick Question - How to "choose" the port to forward Started by Firstblood95 (Program) Simple Port Forwarding	1 Replies 155 Views	April 11, 2012, 07:35:12 PM by Shane
won't let port forward "43594" Started by thorz bong Port Forwarding	4 Replies 228 Views	April 12, 2012, 11:08:20 PM by thorz bong

PcWinTech.com™ Forums

News: