Author Topic: TCP port updating failed (Read 543 times)

hamerted2010 · « **Reply #15 on:** November 21, 2011, 03:00:10 PM »

I was looking at the end results of step 5(updating your router and noticed that it only had the service name Walker2 with start/end port 25565 and ip of 192.168.1.2, my UDP port. i tried adding a custom service, with the service name as walker service type tcp starting/ending port 25565. it also has a sport for ip which is 192.168.1.blank, so i looked at the simple port forwarding software and it had the last digit as 3, so i used that. When i run step 7 the TCP says its successful and the UDP fails. I dont know if i fixed the problem and uncovered another problem or just shifted the problem.

Shane · « **Reply #16 on:** November 21, 2011, 03:01:24 PM »

In the port forwarding page in the router edit the first rule and change the IP to .3

Shane

hamerted2010 · « **Reply #17 on:** November 21, 2011, 03:51:43 PM »

Awesome, did that and now i get success on both ports. Thank you very much you really are a great help. i have two other questions for you if you have a quick answer, or can point me in the right direction if there is a form for it or i need to make a new one.
1) How do i set a password for my wifi?
2) how do i keep my IP static.

Shane · « **Reply #18 on:** November 21, 2011, 03:54:03 PM »

1. In the netgear is a wireless setup page where you can set the wireless password. Do WPA/WPA2 and then set the password.

2. If you need a static IP for your computer use my tool
http://www.pcwintech.com/simple-static-ip

If it is for your internet connection you have to buy one from your ISP.

Let me know your happy and I will lock this thread

Shane

hamerted2010 · « **Reply #19 on:** November 21, 2011, 04:01:56 PM »

1) I have the following security options...
WEP
WPA-PSK[TKIP]
WPA-PSK[AES]
WPA-PSK[TKIP]+WPA-PSK[AES]
im going to guess the last one?

2)The static ip is for my minecraft server. so would i have to buy one?

Shane · « **Reply #20 on:** November 21, 2011, 04:04:48 PM »

1. WPA-PSK[TKIP]+WPA-PSK[AES]

2. If you dont want your internet IP to change. But instead of buying a static IP get a free DDNS account.

http://www.no-ip.com/

Shane

hamerted2010 · « **Reply #21 on:** November 21, 2011, 04:44:41 PM »

Ok Thank you for all your help =)

Shane · « **Reply #22 on:** November 21, 2011, 04:47:30 PM »

No problem

Locking thread.

And as always...
If your happy with my work. Then all I ask in return is you simply let others know about my site and programs. I help with anything computer or network related

Also always feel free to make a post in the feedback forum.
And a facebook like at the top of the page of my site is nice as well.

Shane

Subject / Started by	Replies	Last post
port forwarding only open tcp port but udp remains closed....... Started by daniel798 Port Forwarding	4 Replies 1546 Views	December 26, 2010, 10:09:48 AM by Shane
TCP Success, UDP Failed, Minecraft server Started by Mexxy (Program) Simple Port Forwarding	8 Replies 8026 Views	March 03, 2011, 03:42:28 PM by Shane
there seems to be problem with tcp port 27000....help me Started by rushi6232 « 1 2 3 » (Program) Simple Port Forwarding	30 Replies 2403 Views	April 07, 2011, 02:51:55 PM by Shane
UDP port open TCP is not Started by Teras23 Port Forwarding	1 Replies 564 Views	September 26, 2011, 10:20:12 AM by Shane
Udp port is open tcp isn't Started by Duck « 1 2 » (Program) Simple Port Forwarding	20 Replies 908 Views	November 27, 2011, 02:39:18 PM by Shane

PcWinTech.com™ Forums

News: