Author Topic: remote access to router and webcams (Read 1181 times)

squid · « **on:** October 04, 2011, 05:25:15 PM »

Hi, I have a security cam attached to a motorola sbg900 and have tried for weeks now to get it accessible via the internet. I have included a copy of all the camera settings and router settings. I am desperate and am pulling my hair out trying to get this done. I can view the camera from the local IP address but cannot get it to work remotely. I would really appreciate any help you could give! Thanks!!!

The IP address in the file is old......

Shane · « **Reply #1 on:** October 05, 2011, 09:37:36 AM »

Can you post the network setup screen for the camera as well?

I also noticed 2 port forwarding rules but they where pointing to different IP's.

Shane

squid · « **Reply #2 on:** October 06, 2011, 04:50:12 PM »

I have tried to upload this doc three time so I broke it up. Hope it works..... All of the screens I have access to....

squid · « **Reply #3 on:** October 06, 2011, 04:55:31 PM »

Part 2

squid · « **Reply #4 on:** October 06, 2011, 04:59:31 PM »

Part 3

Shane · « **Reply #5 on:** October 06, 2011, 05:16:48 PM »

Next time just put your picture in paint save it as a jpg and upload it, be a lot smaller

I noticed in the router you have the rule in the trigger page instead of the port forwarding page. Set the rule on the port forwarding page and let me know when it is done and I will try to connect

Shane

squid · « **Reply #6 on:** October 07, 2011, 04:30:26 AM »

Shane,

I have disabled the trigger and there is already a rule in Port Forwarding so you should be able to try it now.... Thanks, I am pulling my hair out with this.

Shane · « **Reply #7 on:** October 07, 2011, 07:25:10 AM »

Still not working.

Lets check a few things.

1. In the router see if you have a DMZ page, if you do make sure it is disabled.
2. In the router find the WAN or Internet IP address, does it match the IP on this page?
http://www.pcwintech.com/myip

Also post a screen shot of the port forwarding page

Shane

squid · « **Reply #8 on:** October 07, 2011, 11:54:37 AM »

Shane DMZ is disabled, the IP's match. Here is the router port forwarding screen. I have disabled port 8001 in it as I used it to check if my ISP was blocking ports.

Shane · « **Reply #9 on:** October 07, 2011, 01:45:02 PM »

IN the camera setup you have the gateway and dns set to 192.168.0.4
They both should be 192.168.0.1

Shane

squid · « **Reply #10 on:** October 07, 2011, 02:01:06 PM »

I'll change it and give it a try (fingers crossed).......

Shane · « **Reply #11 on:** October 07, 2011, 05:03:08 PM »

Still nothing. Post a screen shot of the firewall page in the router for me

Shane

squid · « **Reply #12 on:** October 10, 2011, 06:02:14 AM »

new IP address is 66.189.40.12. I have tried open port finder and it says my ports are not open. Firewall says otherwise.

Shane · « **Reply #13 on:** October 10, 2011, 10:20:10 AM »

Still not working, yet everything looks fine. We need to see if port forwarding is working at all.

I want you to setup a port forwarding rule to your computer, do port 1979. Then use my port tester and see if it works.

http://www.pcwintech.com/simple-port-tester

Shane

squid · « **Reply #14 on:** October 10, 2011, 11:38:57 AM »

will do. At least I am not going crazy if everything seems right to you!

Subject / Started by	Replies	Last post
need some more help with remote access to Lorex system Started by fujin74 « 1 2 » Lorex Auto Port Forwarding	15 Replies 2107 Views	July 25, 2011, 12:44:21 PM by Shane
ugh... still no remote access to Lorex DVR Started by fujin74 « 1 2 » Lorex Auto Port Forwarding	22 Replies 3786 Views	July 27, 2011, 06:36:41 PM by Shane
No remote access to local network, Huawei B260a modem/router Started by yegger « 1 2 » Port Forwarding	29 Replies 1645 Views	November 15, 2011, 02:46:29 PM by Shane
BELKIN N ROUTER TO REMOTE ACCESS DVR. Please HELP! :*( Started by Thanh42 Port Forwarding	11 Replies 660 Views	December 03, 2011, 11:53:02 AM by Shane
having problem viewing my (remote access via external access Started by aldo11 Lorex Auto Port Forwarding	13 Replies 730 Views	February 21, 2012, 10:44:38 AM by Shane

PcWinTech.com™ Forums

News: