EVEN MORE trouble, from the starcraft guy

[DI604starcraft]

back again, here was my original post:
http://forums.pcwintech.com/index.php/topic,1445.0.html

I have been setting DMZ hosting to the ip of 192.168.1.3
this works for a few days, then I can't reach any sites at all.

I still have the DI-604 and the M1000 dual router set-up as before
I attempted to do the advanced port forwarding on the m1000 like you suggested but have run into errors
"ip address and lan address are not in the same subnet"

I tried to follow the directions step by step but could not get it to work.

can you step me through what needs to be put into each box, on each router?
the port I need to forward is 6112

I put that into both port ip range boxes, so in essence 6112 to 6112. correct?
what do I need to put in the remote port ip range boxes below? the same thing? or leave it blank

[Shane]

First thing is I need to see how things are currently setup

Post a few screen shots for me.

1. The results from my port tester app
http://www.pcwintech.com/simple-port-tester

2. A screen shot of the DMZ and or port forwarding page in your router. (I also need to know what the WAN or Internet IP is in the router)

3. A screen shot of the DMZ page in the modem

Shane

[DI604starcraft]

1.) http://img29.imageshack.us/img29/596/unledihf.jpg

2.) http://img716.imageshack.us/img716/3010/unledbe.jpg
2.) http://img195.imageshack.us/img195/8225/unledyu.jpg

some of those virtual server entries are defaults, as I just recently reset both my router and modem. can you advise me as to which of those entries I can delete? I don't have anything else forwarded besides starcraft, as you can see at the bottom.

also, my router is the DI-604 E revision, with the most current firmware available, v3.53

2.) http://img600.imageshack.us/img600/5506/unledkkm.jpg
2.) http://img830.imageshack.us/img830/294/unledgv.jpg

3.) for some reason, I can no longer access the modem by typing in 192.168.1.1 in the address bar.. it loads for a few seconds, then brings up a search results page pertaining to the common instances. this is new as of today, but I assume this is due to having reset the modem via pushing the tiny little button with a paperclip in the back? I did that as well, hoping to resolve the issue. how else can I access the m1000 options?

I am connected to the internet fine.
Wall > Modem > router WAN > LAN1 > Computer

[Shane]

Nice

Looks like what ever you did you got the modem into bridge mode, you can tell because now the D-Link has the internet IP and you are no longer behind 2 routers
http://img830.imageshack.us/img830/294/unledgv.jpg

So now you just need to fix the port forwarding rule.
Your local IP is 192.168.0.2
http://img29.imageshack.us/img29/596/unledihf.jpg

Yet you have the port forwarding rule pointing to 192.168.0.100
http://img195.imageshack.us/img195/8225/unledyu.jpg

Update the rule to point to 192.168.0.2 and give the port tester another try

Shane

[DI604starcraft]

port tester = success. 

shane = king of kings. 

[Shane]

Good to hear your working bud

Since your all set I will lock this thread

I know I have told you this before, but its a habit after each person I successfully help lol

As always...
If your happy with my work. Then all I ask in return is you simply let others know about my site and programs. I help with anything computer or network related
Also always feel free to make a post in the feedback forum.
And a facebook like at the top of the page of my site is nice as well.

Shane