Port fowarding minecraft server isnt working

[Lightthemup]

Hi i have a Cisco WRT160Nv3 Linksys i am trying to port foward minecraft server at 25565 i have set up a static ip because im trying to run a server here i will show everything my static ip is 192.168.1.50

First Screenie:
http://img840.imageshack.us/i/firstscreenie.png/

Second Screenie:
http://img14.imageshack.us/i/secondscreenie.png/

Third Screenie:
http://img823.imageshack.us/i/thirdscreenie.png/

Fourth Screenie:
http://img194.imageshack.us/i/screenie4j.png/

Fifth Screenie:
http://img204.imageshack.us/i/screenie5z.png/


Thanks PLEASE help as soon as you can sorry if i sound desperate been trying to do this forever... its got on my nerves... i am not running wireless even though it is wireless im running wired if it matters

[Evan]

Does your Terraria port forwarding work correctly?

Evan

[Shane]

Why do you have 192.168.2.1 as a dns server?
I take it you might be behind a 2nd router.

Log into your linksys, go to the status page. Check the internet IP on that page, does it match the IP on this page?
http://www.pcwintech.com/myip

Shane

[Lightthemup]

Yes i do have a second router its all for the same computer its a embarq 660 series and my ip does not match my ip is 192.168.2.2 and no my terraria does not work

[Shane]

Thats why your port forwarding doesn't work. Give this a read
http://www.pcwintech.com/how-setup-two-or-more-routers-together-port-forwarding-port-triggering

Shane

[Lightthemup]

Alright i tried setting up DMZ i have no idea if i did it right it still says my ports arent working tho I typed the other ip address 192.168.2.1 in the dmz then it says to: i have know idea what i put there and then under it is some other stuff like destination do i put my static ip here 192.168.1.50?

[Shane]

Did you log into
http://192.168.2.1

Go to DMZ, enable, put 192.168.2.2 and then save?

Need to make sure you setup DMZ in that one and not the linksys.

Shane

[Lightthemup]

There isnt a DMZ section there and i added to the post above

[Shane]

Log into http://192.168.2.1

This is where we need to work with DMZ (If it has it)

Take a screen shot of any page in there so I can see what we are working with

Shane

[Lightthemup]

http://img8.imageshack.us/i/screenie6.png/
There you go i couldnt find a DMZ in that router.. =/

[Shane]

Ah Zyxel

No problem, there will be 2 things you need to do.

First go to the firewall page.
http://www.pcwintech.com/files/screenshots/zyxel-eq-660r_adsl/017.png

Make sure you set WAN TO LAN to permit.

Then go tot he port forwarding page
http://www.pcwintech.com/files/screenshots/Zyxel-P-660HW-D1/009.png

At the top for All Ports put in 192.168.2.2
Then save, and then run my port tester on your system
http://www.pcwintech.com/simple-port-tester

Let me know how it goes.

Shane

[Lightthemup]

it didnt work... =/ lol

[Shane]

I need some screen shots

1. A screen shot of the port forwarding page in the Zyxel.
2. A screen of the firewall page in the Zyxel.
3. A screen of the status page in the linksys.

This way I can check if everything is setup good

One more thing. Sometimes a router wont take the settings till it has been rebooted. Unplug the power to the zyxel then back in. Wait till it comes back up and get me the screens. Feel free to run the tester again after that as well.

I have to leave in 10 min to a job for a customer, so try to get those to me quick

Shane

[Lightthemup]

Ok here
http://img84.imageshack.us/i/screenie7.png/
http://img19.imageshack.us/i/screenie8.png/
http://img27.imageshack.us/i/screenie9.png/

[Shane]

Ah you didnt change the firewall setting.

"WAN to LAN" is currently set to drop. Change that to permit and click apply.

Then try the port tester again

I will be back in a bit.

Shane