it wont work. but it worked at my dads place (Same router)

[Blinxz]

I port forwarded at my dad's place and it worked fine using (cisco epc2425) but at my mother's place it wont work with the same type of router. errors i got is when im update'd my router:

Router: Cisco - EPC2425 (Cisco Firmware)
Loading Commands...
Number Of Port Forwards To Send To Router (1)
Running Commands...

(Current -  1/1)
Adding WillCraft (TCP/UDP) For Ports 25565-25565 To 192.168.0.11()

Running Script From Database For Selected Router
-----------------------------------------------------------------------
Step 01. nav_first_only("")
(Successful) (http://192.168.0.1/)
--------------------------------------
Step 02. nav_first_only("DprSetup.asp")
(Successful) (http://192.168.0.1/DprSetup.asp)
--------------------------------------
Step 03. set_password("login_password")
(Successful)
--------------------------------------
Step 04. click_button_first_only("LOGIN")
(Successful)
--------------------------------------
Step 05. nav_first_only("RgForwarding.asp")
(Successful) (http://192.168.0.1/RgForwarding.asp)
--------------------------------------
Step 06. set_name_array("1|2|3|4|5|6|7|8|9|10")
(Successful)
--------------------------------------
Step 07. set_name_to_check("PortForwardAddressLocalIPX,3")
(Successful) (Current Name From Name Array PortForwardAddressLocal1IPX)
--------------------------------------
Step 08. set_ip("PortForwardAddressLocalIPX,3")
(Failed - Object Not Found)
--------------------------------------
Step 09. set_start_port("PortForwardPortGlobalStart,0")
(Failed - Object Not Found)
--------------------------------------
Step 10. set_stop_port("PortForwardPortGlobalEnd,0")
(Failed - Object Not Found)
--------------------------------------
Step 11. set_type_choices("TCP|UDP|BOTH")
--------------------------------------
Step 12. set_combobox("PortForwardProtocol,0")
(Failed - Object Not Found)
--------------------------------------
Step 13. set_checkbox("PortForwardEnable,0")
(Failed - Object Not Found)
--------------------------------------
Step 14. click_button_last_only("Apply")
(Failed - Object Not Found)
--------------------------------------
-----------------------------------------------------------------------

Finished Adding WillCraft


-------------------DONE! (All Commands Finished)-----------------

When i try to open a server or test the port it wont work what should i do? great software u made

[Evan]

Since you are using the same router, do you still have the old rules in there? If you do, then they are probably pointing to the wrong IP.

Evan

[Blinxz]

It is not the same computer. and i dont have the same settings as before i have the right ip adress + i have turned off i my firewall and lowerd the security many times it still doesnt work

[Evan]

Can you post a screen shot of the port forwarding page? Also, did you use Simple Port Forwarding before when it worked? If you did and it doesn't work now, then was there a firmware update perhaps?

Evan

[Blinxz]

Yes i use'd simple portforwarding before. screenshot on the way

[Evan]

Did the firmware change?

Evan

[Blinxz]

http://www.mediafire.com/?zisuutr8bxu9rqu Thats a download link 2 some pics

[Blinxz]

It hasnt changed

[Evan]

You can upload the pics directly to the forum by using the "Attachments and other options".

Evan

[Blinxz]

There they are.
Edit:
i cant see the whole picture's on here

[Shane]

Looks like there is a login page that the script doesnt handle.
Odd thing is I haven't seen that login page before.
When it comes up, go ahead and login, then close the window and try updating the router again


Shane

[Blinxz]

it still wont work is there any way i can chat with any of you  ?

[Shane]

I am heading out the door to go fix a customers computer

Are you able to log into the router with firefox or IE?

Shane

[Blinxz]

When i get to the login page manually through IE and type in the deafult Password "admin" it just loads then nothing happens. it is like I refresh'd the page. you said u had never seen my login page before its maybe because i live in sweden or something like that. i dont really know.

[Shane]

You log in then nothing happens? This could explain the problem. My program uses IE to view and work with the pages.
Do you have firefox or chrome you could try to log in with?

Shane