Problems with Portforwarding D-Link DIR-600!

[Ronstad]

Here is the Firewall rules:

[Shane]

Its possible it is the router that is bad. Could also simply be your system as well.
Since you did a good job setting up the port forwarding rules everything should be working. But since it isn't we have to start digging in deeper.

So short of trying a different router all together I wanted to check if your antivirus had a firewall in it that might be blocking my port tester

Shane

[Ronstad]

I have disable the Port tester from the firewall, but still failed. What is the next step?

[Ronstad]

Yee now it worked, I disable the whole firewall and the it ran smooth thank you very much, and one last question, this might not be in your area but do you know how to "rename" a cs server, so your ip wont be shown? Like 231.124.2.123:27015 instead of my local:27015

There is still one problem remaining, people cant join the server!

[Shane]

No sure on the cs server. Never ran one myself.

Good to hear it was your firewall software causing the problem and you got it working

If people still cant join make sure the cs server is allowed through the firewall and that you opened all the ports it needs.

Let me know your all set and happy and I will lock this thread

Shane