Please i need help how to make a trinitycore2 server public

[nocduk1]

hI GUYS

This is my 1st post so if it is in the wrong place i do say sorry..;}

well here goes im trying to get a trinitycore 2 repack on line for me and a few friends and who ever else wants to join

please i need help to get this server making this public

 

   now for my help if you dont mind i need a complete noob guild to making this puplic none himatchi

    my setup

   2 pc s in the house 1 router and a wireless router {wireless router supplies both conections to our pcs}my gate way address is 127.168.1.1 

my ipv4 is 127.168.1.3



    MY PORT FORWARD SETUP

    #Service Name authserver.exe Start Port 80 End Port 8950

    Server IP Address 192.168.1.3
    Ports - Custom Services start port and end port as above
    Service Type is tcp/udp

    Port Triggering Portmap Table
    # Enabled

    Service Name authserver
    Service Type TCP:8050
    Inbound Connection TCP/UDP: ports 79..to 8985
    Service User ANY

then theres these settings but i dont now if i have to use any
    
Router Status
   Attached Devices
   Backup Settings
   Set Password
   Router Upgrade
Advanced
   Wireless Settings
   Port Forwarding / Port Triggering
   WAN Setup
   LAN Setup
   Dynamic DNS ...............{ i have done this 1 and set it correct }
   Static Routes
   Remote Management
   UPnP    this is active



    AND THATS ALL I CAN SET

    MY WINDOWS 7 HOST  file IS SET

# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host


127.0.0.1 wowuk1.dyndns.info
192.168.1.3 wowuk1.dyndns.info
192.168.1.1 wowuk1.dyndns.info
82.47.167.107 wowuk1.dyndns.info

    AND I USE NAVICAT to edit the server data base
    auth then open realmlist and heres the setting

    name of realm {characteristic of the ancient wow }then { adress 82.47.167.107} {port 8085}

{i could put my wowuk1.dyndns.info for the address but this causes loop problems }

    NOTHING ELSE TO SET

  here is the MySQL window running print out

    Please dont close Window while MySQL is running
    MySQL is trying to start
    Please wait ...
    MySQL is starting with mysql\bin\my.cnf (console)
    100925 22:29:55 [Note] mysql\bin\mysqld: ready for connections.
    Version: '5.0.45-community-nt' socket: '' port: 3306 MySQL Community Edition
    (GPL)


ok next is trinitycore1\authserver.exe

    TrinityCore Rev: * Release Hash: * (Win32,little-endian) (realm-daemon)
    <Ctrl-C> to stop.

    Using configuration file authserver.conf.
    MySQL client library: 6.0.0
    MySQL server ver: 5.0.45-community-nt
    Loaded 1 prepared MySQL statements for auth DB.
    Added realm "characteristic of the ancient wow".
    Added realm "Trinity2 Blizz".
    TrinityRealm process priority class set to HIGH

    LOOKS FINE WOULD YOU AGREE ?????

   

    and heres a print of the world server config

    RealmID = 1
    DataDir = "."
    LogsDir = ""
    LoginDatabaseInfo = "127.0.0.1;3306;root;ascent;auth"
    WorldDatabaseInfo = "127.0.0.1;3306;root;ascent;world1"
    CharacterDatabaseInfo = "127.0.0.1;3306;root;ascent;characters"
    MaxPingTime = 30
    WorldServerPort = 8085
    BindIP = "0.0.0.0"


    i have set realmlist wowuk1.dyndns.info..........{ this points the game to my host}

    and i can run mysql  the authserver and worldserve but i can not log in to my game message says server offline


    {AS I SAID IM A TOTAL NOOB AT THIS SORT OF THING}

   

   
    so i am now still no closer and more confused lol

    i have been trying to do this 4 days now

    {CAN YOU PLEASE PLEASE GET IT RIGHT FOR ME NOOB STYLE

    Thank you in advance

    Karl

my router is netgear

    ps heres a link to what i have changed on the realm
    http://www.youtube.com/watch?v=y7yIS6UxQDA

my website address is http://wowuk1.webeden.co.uk/#/home/4544265745 

[nocduk1]

Also can i just add i have turned my firewall off just to see if that was my problem but still doesent work...;}

[Shane]

OK a few things first.

Start by removing all the wowuk1.dyndns.info from your host file.
No need to change that file at all from the default.

Also close the server (If it is is running on your computer) and download and run my port tester. Does the port say it is open?

And when you connect to your own server you need to connect to it by your local IP not your internet IP.
But your friends will connect to you by your internet IP.

Lets go from here.

Today is my daughters 4th birthday so it may be a bit before I respond 

Shane

[Evan]

Happy birthday to the little one.  Wish her a happy birthday from me...if she asks "who's that" say something nice for me.   

-Evan

[nocduk1]

wow shane
Thank you for your quick response as i am really grea tfull you are trying to help ohhh and a great big happy birthday to ya little girl hope you guys have a great fun day   


Well i have done what you said and put my host back to default the server is shut down {your software installed }and running now im a bit stuck as to which port i am checking

as a lucky

 port 3306 tcp success this is open
 port 3306 udp failed

sorry for been such a noob ..lol

its 230am so i better get some sleep  :blank:night guys i will check back in the morning ....have fun night..

[Shane]

You have your port forwarding rule to let both TCP and UDP through for that port. TCP is working but the UDP is failing.

What router do you have?
Also it is most likely your firewall/antivirus software that is blocking UDP 

Shane

[nocduk1]

morning Shane

i hope the little girls birthday went well  :cheesy:and your software is a must for guys like me

{man all i can say is its brilliant}


Well here goes i have two routers


The first is a netgear wireless g router wgr614 v9

which both pcs are conected to via network cables
{i think i have port forward the settings for this ok with your cool port forward software
at  192.168.1.1} my gateway

The second is a  Ambit ED8C013.00  that my wireless route plugs in to
i dont think this is supported in your port forward software but sorry if i am wrong

ok so i have now turned my firewall of and tested again

heres the results


ip to listen on 192.168.1.3

80 TCP and UDP
3006 TCP and UDP
8050 TCP and UDP
8085 TCP and UDP


all succeess

now i turn my firewall on and tested again


all failed so i now know i need to change my firwall setting

but as a {dum ass} at this sort of thing do i need to  set port forward 1st router Ambit ED8C013.00 ???

or is this ok now and i just need to set my firewall.
If so how do i find the ip address so i can type it in my browser to get access

and please would you be so kind as to tell me how to set my firewall

i look forward to your next instructions

Kind regards Karl

[Shane]

If all the ports passed my tester then no more work needs to be done in your routers 

All the blocking is in your firewall software.

So what antivirus/firewall do you have installed?

Shane

[nocduk1]

haaa thats good new,,, i reset my firewall to default and run your software again firewall pops up and i clicked  allow and now all ports are fine
i have to go out for a while but soon as back i will redirect my
world of warcraft game set realmlist to 127.0.0.1
then in the navicat change the database auth realmlist address from {wowuk1.dyndns.info}to my external ip

then start the mysql auth and world

on the second pc world of warcraft game set realmlist to {my external ip} instead of {wowuk1.dyndns.info}

and all should be good ?

 then any 1 else that wants to play i give them the {external ip}not the dyndns

if this doesent work i guess my problem is in the

authserver

LoginDatabaseInfo = "127.0.0.1;3306;root;ascent;auth"
LogsDir = ""
MaxPingTime = 30
RealmServerPort = 3724
BindIP = "0.0.0.0"
PidFile = ""
LogLevel = 0
LogFile = "auth.log"
LogTimestamp = 0
LogFileLevel = 0
LogColors = ""
EnableLogDB = 0
DBLogLevel = 1
UseProcessors = 0
ProcessPriority = 1
RealmsStateUpdateDelay = 20
WrongPass.MaxCount = 0
WrongPass.BanTime = 600
WrongPass.BanType = 0

or in the worldserver

################################################
# Trinity Core World Server configuration file #
################################################
[worldserver]

# Note to devs, line breaks should be at column 80
###############################################################################
# CONNECTIONS AND DIRECTORIES
#
#    RealmID
#        RealmID must match the realmlist inside the realmd database
#
#    DataDir
#        Data directory setting.
#        Important: DataDir needs to be quoted, as it is a string which may
#         contain space characters.
#        Example: "@prefix@/share/trinitycore"
#
#    LogsDir
#        Logs directory setting.
#        Important: Logs dir must exists, or all logs need to be disabled
#        Default: "" - no log directory prefix, if used log names isn't
#         absolute path then logs will be stored in current directory.
#
#
#    LoginDatabaseInfo
#    WorldDatabaseInfo
#    CharacterDatabaseInfo
#        Database connection settings for the world server.
#        Default:
#                    hostname;port;username;password;database
#                    .;somenumber;username;password;database
#                     - use named pipes in Windows
#                    Named pipes: mySQL required adding
#                        "enable-named-pipe" to [mysqld] section my.ini
#                    .;/path/to/unix_socket;username;password;database
#                     - use Unix sockets in Unix/Linux
#
#    MaxPingTime
#        Settings for maximum database-ping interval (minutes between pings)
#
#    WorldServerPort
#        Default WorldServerPort
#
#    BindIP
#        Bind World Server to IP/hostname
#
###############################################################################

RealmID = 1
DataDir = "."
LogsDir = ""
LoginDatabaseInfo     = "127.0.0.1;3306;root;ascent;auth"
WorldDatabaseInfo     = "127.0.0.1;3306;root;ascent;world1"
CharacterDatabaseInfo = "127.0.0.1;3306;root;ascent;characters"
MaxPingTime = 30
WorldServerPort = 8050
BindIP = "0.0.0.0"


ok i woont jump to far ahead ...



and now the bad part i aint running no antivirus software

[Shane]

Port forwarding is working and your all good there

also get your self a antivirus! here is what I use and put on my customers machine (Its free) Avira www.free-av.com

You are right, give them your external IP and you use your local. The wowuk1.dyndns.info should work for your friends, if it doesn't give them your external IP instead.

Shane

[nocduk1]

well m8 as before ports are open
 i tried again and i can log in using 127.0.0.1  but the other pc failed using 192.168.1.3 so i tried wowuk1.dyndns.info as well and still failed



i dont no if you need this to look through thats if you dont mind
but its here just incase


{Windows IP Configuration}


Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::cc01:12f9:82d9:895c%11
   IPv4 Address. . . . . . . . . . . : 192.168.1.3



IPv4 Address  192.168.1.3

 {This is the address i put in my navicat data}

 auth /realmlist/ address   192.168.1.3
 and also used on the other pc  ..................if this is correct i have completed



   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1

Tunnel adapter isatap.{4664895F-E97E-4283-B688-34ECFA30C67D}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

   Connection-specific DNS Suffix  . :
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:c0d:139a:3f57:fefc
   Link-local IPv6 Address . . . . . : fe80::c0d:139a:3f57:fefc%13
   Default Gateway . . . . . . . . . : ::




{this is the dyndns Host Services}

Hostname           Service      Info
wowuk1.dyndns.info    Host            82.47.167.107 ip


{this is the authserver opened with note pad}



###############################################
# Trinity Core Auth Server configuration file #
###############################################
[authserver]

# Note to devs, line breaks should be at column 80
###############################################################################
# AUTH SERVER SETTINGS
#
#    LoginDatabaseInfo
#        Database connection settings for the realm server.
#        Default:
#                    hostname;port;username;password;database
#                    .;somenumber;username;password;database
#                     - use named pipes in Windows
#                    Named pipes: mySQL required adding
#                        "enable-named-pipe" to [mysqld] section my.ini
#                    .;/path/to/unix_socket;username;password;database
#                     - use Unix sockets in Unix/Linux
#
#    LogsDir
#        Logs directory setting.
#        Important: Logs dir must exists, or all logs need to be disabled
#        Default: "" - no log directory prefix, if used log names isn't
#         absolute path then logs will be stored in current directory.
#
#    MaxPingTime
#         Settings for maximum database-ping interval (minutes between pings)
#
#    RealmServerPort
#         Default RealmServerPort
#
#    BindIP
#         Bind Realm Server to IP/hostname
#
#    PidFile
#        Realmd daemon PID file
#        Default: ""             - do not create PID file
#                 "./realmd.pid" - create PID file (recommended name)
#
#    LogLevel
#        Server console level of logging
#        Default: 0 = Minimum
#                 1 = Basic
#                 2 = Detail
#                 3 = Full/Debug
#
#    LogFile
#        Logfile name
#        Default: "realmd.log"
#                 "" - Empty name disable creating log file
#
#    LogTimestamp
#        Logfile with timestamp of server start in name
#         in form Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext
#        Default: 0 - no timestamp in name
#                 1 - add timestamp in name
#
#    LogFileLevel
#        Server file level of logging
#        Default: 0 = Minimum
#                 1 = Basic
#                 2 = Detail
#                 3 = Full/Debug
#
#    LogColors
#        Color for messages (format "normal basic detail debug")
#        Default: "" - no colors
#        Colors: 0  - BLACK
#                1  - RED
#                2  - GREEN
#                3  - BROWN
#                4  - BLUE
#                5  - MAGENTA
#                6  - CYAN
#                7  - GREY
#                8  - YELLOW
#                9  - LRED
#                10 - LGREEN
#                11 - LBLUE
#                12 - LMAGENTA
#                13 - LCYAN
#                14 - WHITE
#        Example: "13 11 9 5"
#
#    EnableLogDB
#        Enable/disable logging to database (LogDatabaseInfo).
#        Default: 0 - disabled
#                 1 - enabled
#
#    DBLogLevel
#        Log level of DB logging.
#                 0 = Minimum
#        Default: 1 = Basic
#                 2 = Detail
#                 3 = Full/Debug
#
#    UseProcessors
#        Processors mask for multi-processor system (Used only in Windows)
#        Default: 0 (selected by OS)
#                 number (bitmask value of selected processors)
#
#    ProcessPriority
#        Process proirity setting (Used only at Windows)
#        Default: 1 (HIGH)
#                 0 (Normal)
#
#    RealmsStateUpdateDelay
#        Realm list Update up delay
#         (updated at realm list request if delay expired).
#        Default: 20
#                 0  (Disabled)
#
#    WrongPass.MaxCount
#        Number of login attemps with wrong password
#         before the account or IP is banned
#        Default: 0  (Never ban)
#
#    WrongPass.BanTime
#        Duration of the ban in seconds (0 means permanent ban)
#        Default: 600
#
#    WrongPass.BanType
#        Ban the IP or account on which login is attempted
#        Default: 0 (Ban IP)
#                 1 (Ban Account)
#
###############################################################################

LoginDatabaseInfo = "127.0.0.1;3306;root;ascent;auth"
LogsDir = ""
MaxPingTime = 30
RealmServerPort = 3724
BindIP = "0.0.0.0"
PidFile = ""
LogLevel = 0
LogFile = "auth.log"
LogTimestamp = 0
LogFileLevel = 0
LogColors = ""
EnableLogDB = 0
DBLogLevel = 1
UseProcessors = 0
ProcessPriority = 1
RealmsStateUpdateDelay = 20
WrongPass.MaxCount = 0
WrongPass.BanTime = 600
WrongPass.BanType = 0





{world server opened with note pad}


################################################
# Trinity Core World Server configuration file #
################################################
[worldserver]

# Note to devs, line breaks should be at column 80
###############################################################################
# CONNECTIONS AND DIRECTORIES
#
#    RealmID
#        RealmID must match the realmlist inside the realmd database
#
#    DataDir
#        Data directory setting.
#        Important: DataDir needs to be quoted, as it is a string which may
#         contain space characters.
#        Example: "@prefix@/share/trinitycore"
#
#    LogsDir
#        Logs directory setting.
#        Important: Logs dir must exists, or all logs need to be disabled
#        Default: "" - no log directory prefix, if used log names isn't
#         absolute path then logs will be stored in current directory.
#
#
#    LoginDatabaseInfo
#    WorldDatabaseInfo
#    CharacterDatabaseInfo
#        Database connection settings for the world server.
#        Default:
#                    hostname;port;username;password;database
#                    .;somenumber;username;password;database
#                     - use named pipes in Windows
#                    Named pipes: mySQL required adding
#                        "enable-named-pipe" to [mysqld] section my.ini
#                    .;/path/to/unix_socket;username;password;database
#                     - use Unix sockets in Unix/Linux
#
#    MaxPingTime
#        Settings for maximum database-ping interval (minutes between pings)
#
#    WorldServerPort
#        Default WorldServerPort
#
#    BindIP
#        Bind World Server to IP/hostname
#
###############################################################################

RealmID = 1
DataDir = "."
LogsDir = ""
LoginDatabaseInfo     = "127.0.0.1;3306;root;ascent;auth"
WorldDatabaseInfo     = "127.0.0.1;3306;root;ascent;world1"
CharacterDatabaseInfo = "127.0.0.1;3306;root;ascent;characters"
MaxPingTime = 30
WorldServerPort = 8085
BindIP = "0.0.0.0"




well Shane i really am starting to feel like a pain m8 {10 out of 10}for your help

[Shane]

OK first off dont use 127.0.0.1 at all.

127.0.0.1 is a local network for the computer itself and doesn't connect to the rest of the network.

in your config file you want to use your 192.168.1.3 address.

Change the config and restart your server and give it a try

Shane

[nocduk1]

ummm im a bit confused ..lol when you say use 192.168.1.3
so i guess im putting this in place of the 127.0.0.1 in the authserver and worldserver


authserver now looks like this


LoginDatabaseInfo = "192.168.1.3;3306;root;ascent;auth"     instead of 127.0.0.1
LogsDir = ""
MaxPingTime = 30
RealmServerPort = 3724
BindIP = "0.0.0.0"
PidFile = ""
LogLevel = 0
LogFile = "auth.log"
LogTimestamp = 0
LogFileLevel = 0
LogColors = ""
EnableLogDB = 0
DBLogLevel = 1
UseProcessors = 0
ProcessPriority = 1
RealmsStateUpdateDelay = 20
WrongPass.MaxCount = 0
WrongPass.BanTime = 600
WrongPass.BanType = 0




and my worldserver now looks like this

RealmID = 1
DataDir = "."
LogsDir = ""
LoginDatabaseInfo     = "192.168.1.3;3306;root;ascent;auth"       instead of 127.0.0.1
WorldDatabaseInfo     = "192.168.1.3;3306;root;ascent;world1"         instead of 127.0.0.1
CharacterDatabaseInfo = "192.168.1.3;3306;root;ascent;characters"      instead of 127.0.0.1
MaxPingTime = 30
WorldServerPort = 8085
BindIP = "0.0.0.0"


i tried run the server mysql starts fine
but authserver and worldserver wont run


so i did this and changed them to 127.0.0.3

server starts fine i can still log in but not on the other pc

using set realmlist 192.168.1.3
        or         wowuk1.dyndns.info




i also left the {navcat} authserver realmlist set at 192.168.1.3
then tried with the wowuk1.dyndns.info


and still same i can log in but not on second pc, also thanks for the link i will download asap

do you have any more suggestions please or are we coming to a stand still ..lol

[Shane]

I never used the program you are using so I am not sure. I know your port forwarding part is done.
and yes you should use 192.168.1.3 over 127.0.0.1

Are you sure the firewall isnt blocking it like it was my port tester?

Shane

[nocduk1]

EASY M8 i tried again with the  firewall turned of just to make sure and still same results as above fail ..lol