2 router port forwarding :b933 modem/router(DSL)+linksys wrt45g2

[batusaiblitz]

hi good day.for starters.....my previos setting initially works and i can play online RTS. After some time i just cant able to play online and just log in then disconnect most of the time i cant log in.my internet connection works the same as before.im trying to make things work thus i want to try port forwarding.
my isp is globe telecom.i need to port forward b933 and linksys wrt45g2  to work for company of heroes udp 30260 and 6112 udp.
a i on the right track???Please help appriciated...

[Shane]

Sounds like your behind 2 routers, which is easy to fix 

Give this a read first and see if it helps you on your way.
http://www.pcwintech.com/common-problems-fixes-port-forwarding

Shane

[batusaiblitz]

i have been trying to follow your instruction step by step.

1st step :set up static ip
my modem ip address: 192.168.1.1 my router lan ip : 192.168.0.1

my problem comes when i set the dmz 192.168.0.1 in the modem pop up message tells that dmz ip address and ip address subnet must be the same.

so i change my router lan ip to :192.168.1.2
log in to wrt54g2
change ip to 192.168.1.2
pop up message save succesfuly close and or renew ip....
then i close the browser and un plug router (hard reset)
then log in to 192.168.1.2

it then that i do not have internet connection but only lan connection...
so for now i changed back to the old stteings..
What do i have to do...please help its already 4 days i cant connect to online relic....company of heroes.please help on this....tia

[Shane]

Sorry took me so long to reply, been taking care of my customers all day, leave it to a good power outage to mess things up lol.

On your router, don't set the ip to static in it, since no other computers or routers will get a IP from the modem it should just keep the IP it gets.
In the router go to the status page, find its WAN or Internet IP address. This is the IP you want to put into the DMZ of the modem.

Let me know if you still have trouble

Shane

[batusaiblitz]

hi shane tnx for the reply.i forgot to tell you that i have two pc connected in the router.(if that helps)
if i change modem(b933 huawei)) ip address to 192.168.1.2 and router 192.168.1.1 i loose internet connection..
Checked other threads yesterday and they're telling that b933 huawei and linksys should not belong to the same subnet..there will be a nating problem..Is it true????
Because when i do so i do loose internet connection.
thats why for now im using 192.168.1.1 and 192.168.0.1......
they also says bridging will help but i dont trust them cause they're threads is not complete..not like here in pcwintech.what should i do next

[Shane]

Dont change any IP's in the modem or router, no need to.
Just do this.

First, log into the linksys and go to this page
http://www.pcwintech.com/showimage?file=files/screenshots/Linksys-WRT54G_v8/021.png

See the IP address on yours? Write it down.

Now log into the b933 and go to the dmz page. (I attached the screen)
Put DMZ status to enable then for DMZ IP put the ip you wrote down.
Now Click apply.

Thats it! 

If I am reading your post right your getting lost on the LAN ip's and the WAN ip's. So just do as I said here. What this does is tells the b933 to send all connections to that IP. That IP is the IP the linksys got from the b933. Now just setup the port forwarding rules in the linksys and you no longer need to worry about the b933 

Shane

[batusaiblitz]

tnx bro.ill try to set it up later midnight. ill start at the beginning again.ill follow ur instructions in setting up static ip then the 2 router port forwarding using this ip.tnx again

[Shane]

no static ip! the static ip in my program is for your computer not your router, do change any IP infor in the router or modem, just follow those instructions

Im off to bed!

Shane

[batusaiblitz]

followed your instruction.I did not set up static ip.enable dmz and placed ip i get from status window of wrt54g2..Create port forwarding rule 3620 and 6112..But still when i chechecked wit pfporchecker.it says not open...

[Shane]

Well try to use my port tester instead, I cant go off what someone else's program says lol.

And now that (if you did it right) the 2 router thing shouldn't be getting in the way make sure you read the rest of
http://www.pcwintech.com/common-problems-fixes-port-forwarding

Every problem I have helped people with I have put on that page

If you still have trouble I can get on msn or yahoo with you and see whats going on.

[batusaiblitz]

merry christmas  to you and your family and a happy new year to us all.....
hope to have a good year always......

Though im not having luck on my port forwarding.Still im very much grateful on helping me out here.....
If it would be possible..Mayeb we can go on ym and walk me through this port forwarding problem of mine.

[Evan]

Did you ever get this working correctly?  If you didn't and you can't respond in this thread (due to it being locked) then just email me and let me know.

-Evan

[yuri.debura]

merry Christmas  to you and your family ccna security and a happy new year to us all.....
hope to have a good year always......

Though im not having luck on my port forwarding.Still im very much grateful on helping me out here.....
If it would be possible..Mayeb we can go on ym and walk me through this port forwarding problem of mine.

    
May this Christmas be so special
that you never ever feel lonely again
and be surrounded by loved ones throughout!
    

Thanks